Services
Here’s what we can do for you.
EPC Module Repair
We repair all types of EPC modules, whether it’s an inlet, detector, or auxiliary.
Autosampler Repair
We repair Agilent 7673, 7683 autosampler towers, trays, and controllers in as little as just a couple of days.
Oven Heater Shroud Repair
We will repair your heater shroud using your existing stainless steel housing with new, quality components added.
Rough Pump Rebuilds
Our repairs on Edwards roughing pumps meet strict requirements in vacuum quality and noise levels.
Source Cleaning
If you’ve got a dirty ion source, we can help. We offer cleaning or exchange services on all types of Agilent sources.
Flow Module Repair
Do you have an EPC module that isn’t working properly? The OEM offers no repair solution and recommends you discard it and buy a new EPC. That’s not what anyone wants to hear with a part that costs well over $3,000 (some are over $4,000 as of 2012). We repair all types of flow modules, whether it’s an inlet, detector, or auxiliary EPC.
We offer repair services for 6890 and 6850 series GC EPC modules of any type. We use a tiered repair price so that uncomplicated repairs like sample eluate buildup or a deteriorated seal are offered at a discounted rate.
A breakdown of what constitutes a quick repair and an advanced repair is listed below:
| Cleaning / Testing | $140.00 |
| Calibration | $70.00 |
| O-Ring Replacement | $10.50 |
| TOTAL | $220.50 |
|---|
| Septum Purge 3cc | G1544-60710 |
| Valve 1 | G1531-60543 |
| Valve 2 | G1531-60541 |
| Valve 3 | G1531-60544 |
| Digital Valve | G1544-60580 |
| Circuit Board | G1575-60040 |
| Flow Sensor | G1543-80010 |
| PSI Sensor 100 | G1531-80010 |
| PSI Sensor 150 | G1531-80030 |
| Module specific components (toggle valve, etc.) | |
| Mainframe Parts | |
| TOTAL | $750 |
|---|
Autosampler Repair
| Plunger Motor Repair | $135 |
| Autosampler Tower Repair ** (18593B // 18593C // G1513A) | $180/hr |
| Autosampler Tray Repair ** (18596B // 18596C) | $180/hr |
| Autosampler Controller Repair ** (18594B // 18594C) | $180/hr |
* Plunger motors must be able to spin freely and can’t be stuck. There is a $30 non-refundable inspection fee which can be applied towards repair service if motor is repairable.
** Tower, tray, and controller repair is $180 per hour for bench rate billed in half hour increments. Parts needed to complete repair will be billed at an additional cost.
All repairs done by WN Technical are guaranteed working and carry a 60 day warranty.
Oven Heater Shroud Repair
We are now offering oven heater shroud repairs to the public! We have been repairing oven heater shrouds on our service contracts for some time, saving us considerable amounts of money.
They have proven to be effective d have shown great longevity in both 120v and 220/240v applications. As the prices for OEM heater shrouds continue to rise*, it is more important than ever to seek out viable alternatives.
We will repair your heater shroud using your existing stainless steel housing with new, quality components added. We will then test each one to assure reliable performance.
We offer repairs on heater shrouds for 7890 series, 6890 series, and 5890 series Gas Chromatographs in any voltage configuration. Simply let us know which voltage you require. For your convenience, a list is below containing the different part number and voltage options.
We trust our heater repairs, as such, each repaired heater comes with a 6 month warranty.
*6890 and 7890 series Oven Shrouds direct from the OEM are currently $800+ (minor variances between voltages) as of February, 2019.
| Voltage | Series | OEM Part # |
|---|---|---|
| 120V | 5890 | 05890-61615 |
| 200V | 5890 | 05890-61625 |
| 220V | 5890 | 05890-61635 |
| 230V | 5890 | 05890-61645 |
| 240V | 5890 | 05890-61655 |
| 120V | 6890 / 7890 | G1530-61610 |
| 200V | 6890 / 7890 | G1530-61620 |
| 220V | 6890 / 7890 | G1530-61630 |
| 230V | 6890 / 7890 | G1530-61650 |
| 240V | 6890 / 7890 | G1530-61640 |
| TOTAL | $195 |
Roughing Pump Rebuild Service
Our rebuild service is an all-inclusive option and includes pump teardown, cleaning, installation of all new seals, gaskets, valves, o-rings, washers, springs, filter parts, a waved distribution washer, blades, blade pins, bearings, and c-clips.
Additional Parts
Occasionally, a pump will be in such a condition that it requires a replacement part such as a rotor, capacitor, motor, etc. We will send you a revised quote before any work is done if your pump requires any additional parts during its repair.
| Model | Rebuild Price |
|---|---|
| E2M1.5 | $725 |
| E2M2 | $645 |
| E2M5 | $623 |
| E2M8 | $644 |
| E2M12 | $682 |
| E2M18 | $777 |
| E2M28 | $836 |
| E2M30 | $836 |
| RV3 | $728 |
| RV5 | $740 |
| RV8 | $855 |
| RV12 | $866 |
Source Cleaning
If you’ve got a dirty ion source, we can help. We offer cleaning or exchange services on all types of Agilent ion sources.
Please note – if the sources listed below are received incomplete or with parts damaged, appropriate charges will be made to cover the cost of replacement parts.
Unrepairable sources will have a minimum charge. This is done on a case by case basis.
| Source Cleaning | $400 |
| Source Exchange | $800 |
| Source Purchase | $1,200 |
| Source Cleaning | $330 |
| Source Exchange | $800 |
| Source Cleaning | $600 (includes replacement filaments) |
| Source Exchange | $932 |
